SAVINGS!!!   Free Shipping - Orders $100 or more.

Your Cart

Checkout

SecureGRIP Non-Slip Spray (Clear/Matte)

SecureGRIP® ALL Purpose Non-Slip SPRAY is used on bathtubs, tile, wood, concrete, metal, stamped concrete, plastic, and vinyl, porches, stairs, walkways, decks, ramps, rails, floors and much more.

Your Price

$24.99

This product is currently sold out

Quantity: - +

  • Product Information
  • FAQ (0)
  • Reviews (0)

SecureGRIP® Non-Slip Spray sports a wide spray tip pad for ultimate comfort and control, eliminating finger fatigue from continuous spraying. Our revolutionary spray cans create a uniform, evenly textured surface every time.

SURFACE PREPARATION:

Surface must be clean, dry, and free of rust before painting. Scrub the surface with a commercial cleaner paying special attention to high build soiled areas. Rinse with clean water and let thoroughly dry. Remove all loose debris, paint and rust with a wire brush or sandpaper. Concrete should be cleaned with a suitable cleaner. When applying to bathtubs and/or tile lightly sand or etch glossy surfaces. Bathworks® EZ Etch is highly recommended for all porcelain, ceramic, and glass surfaces.

Directions:

  1. Protect surrounding areas from spray mist. For best results, use when spray can is between 50 F and 90 F (10 C and 32 C). 2. Shake can at least 1 minutes after rattle is heard and occasionally during use. 3. Spray surface with steady even strokes at a distance 12 to 14 inches (30 to 35cm). 4. If clogging develops, turn sprayhead ¼ turn or remove and clean sprayhead slot. DO NOT stick pin or any other object into can opening. With can and sprayhead pointed away from you, reinsert sprayhead with a gentle twisting motion. 5. To clear sprayhead for future use, turn can upside down and spray for 3 seconds. Completely empty cans may be recycled or disposed of with regular trash. Dispose of partially empty cans responsibly. DO NOT incinerate or compact.

 NOTE: To avoid “yellowing” spray light coats.

Primer: Primer is not necessary.

Additional coats may be required on porous surfaces. A second coat can be applied within 30 mins or after 24 hours. Allow more time at cooler temperatures. Allow 12 hours before use.

Clean-up: Mineral Spirits or Paint Thinner

For Emergency Help Call Chemtrec® 1-800-424-9300 or local 911 service Bathworks® & SecureGRIP® are registered trademarks of Tub Refinishing, Inc. Product made in the USA

User is responsible for establishing that these products are suitable for the user’s application. Distributor, manufacturer denies any responsibility suitability of use. Under no circumstances is the supplier liable for any costs, direct or indirect damages.

SDS & Instructions

Add your Review